Hermle Z216-M high-speed microcentrifuge reaches 15,000 rpm and 21,631 × g with rotor options for 0.2–5 mL tubes and up to 44 microtubes.

Roll over image to zoom in Click on image to zoom

The Hermle Z216-M High-Speed Microcentrifuge combines high centrifugal force, high microtube capacity and a broad selection of interchangeable rotors in a compact benchtop system. With a speed range of 200 to 15,000 rpm and maximum RCF of 21,631 × g, the Z216-M can be configured for a variety of microcentrifuge applications.

Depending on the installed rotor, the Z216-M accepts tube formats ranging from 0.2 mL to 5.0 mL, including standard 1.5/2.0 mL microcentrifuge tubes, PCR strips, spin column kits, 5 mL centrifuge tubes and hematocrit capillaries. The available Z216-4420 rotor provides capacity for up to 44 × 1.5/2.0 mL tubes per run, while the Z216-2420S COMBI-Rotor accommodates both microcentrifuge tubes and PCR strips.

Advanced microprocessor controls allow rotational speed to be set and displayed in either rpm or RCF, and the control system provides adjustable acceleration and deceleration rates, stored programs and a Quick-key for short runs. The Z216-M also features a motor-driven lid lock, active imbalance detection and automatic cut-off.

The Z216-M has an 11-inch-wide footprint and weighs approximately 37.4 lb (17 kg). Rotors are sold separately, allowing the centrifuge to be configured for the tube format and throughput requirements of the laboratory.

Key Features

Maximum speed of 15,000 rpm
Maximum RCF of 21,631 × g
Speed range of 200–15,000 rpm
Maximum capacity of 44 × 1.5/2.0 mL tubes
Rotor configurations supporting tubes from 0.2 mL to 5.0 mL
Nine rotor options
COMBI-Rotor option for microtubes and PCR strips
Speed selection/display in rpm or RCF
Speed adjustment in increments of 10
Quick-key for short runs
10 acceleration and deceleration rates
Unbraked deceleration option
Storage for up to 99 programs including rotor
Motor-driven lid lock
Active imbalance identification and cut-off
Maintenance-free induction drive
Large LCD display
Foil keyboard designed for one-handed operation
Noise level below 60 dBA at 21,379 × g
IEC 61010 safety standard cited by Hermle

Compatible Rotors

Rotor	Capacity / Application	Maximum Speed	Maximum RCF
Z216-2420S	24 × 1.5/2.0 mL + 4 PCR strips	15,000 rpm	21,631 × g*
Z216-2420	24 × 1.5/2.0 mL	15,000 rpm	21,379 × g
Z216-3020H	30 × 1.5/2.0 mL	13,500 rpm	19,151 × g
Z216-4420	44 × 1.5/2.0 mL	15,000 rpm	21,379 × g
Z216-24SC	Spin column kits	13,500 rpm	17,317 × g
Z216-1205	12 × 5 mL	14,500 rpm	19,978 × g
Z216-3202	4 PCR strips / 32 × 0.2 mL	15,000 rpm	15,343 × g
Z216-24HEM	24 capillaries	12,000 rpm	14,970 × g
Z216-1220H	12 HLA / 1.5/2.0 mL swing-out	9,000 rpm	7,510 × g

Tube and Application Flexibility

The Z216-M can be configured for several tube and sample-container formats by selecting the appropriate rotor and adapter:

0.2 mL PCR tubes
0.5 mL tubes
1.5 mL microcentrifuge tubes
2.0 mL microcentrifuge tubes
PCR strips
Spin column kits
5.0 mL centrifuge tubes
Cryotubes with compatible adapters
Hematocrit capillaries
HLA / 1.5/2.0 mL tubes with the Z216-1220H swing-out rotor

Controls and Operation

The Z216-M's microprocessor control system provides:

Permanent display of preset and actual values
Speed selection in either rpm or RCF
Adjustment in increments of 10
Quick-key for short centrifugation runs
10 acceleration and deceleration rates
Unbraked deceleration
Storage of up to 99 runs including rotor

Why Buy the Hermle Z216-M High-Speed Microcentrifuge?

High-speed performance: Operates at up to 15,000 rpm with a maximum RCF of 21,631 × g.
Up to 44-tube capacity: With the compatible Z216-4420 rotor, the Z216-M can accommodate up to 44 × 1.5/2.0 mL microcentrifuge tubes per run.
Broad tube-format flexibility: Available rotor configurations support tubes from 0.2 mL to 5.0 mL as well as PCR strips, spin column kits and hematocrit capillaries.
Multiple rotor configurations: Choose from nine rotor options to configure the centrifuge for specific tube formats and applications.
Advanced microprocessor controls: Set and display speed in either rpm or RCF, adjust acceleration and deceleration rates and store frequently used programs.
Compact benchtop design: The Z216-M is approximately 11 inches wide while supporting high-speed and high-capacity rotor configurations.

Frequently Asked Questions

What is the maximum speed of the Hermle Z216-M?
The Hermle Z216-M has a maximum speed of 15,000 rpm.

What is the maximum RCF of the Z216-M?
The maximum RCF is 21,631 × g when the centrifuge is configured with an appropriate compatible rotor.

Does the Hermle Z216-M include a rotor?
No. The Z216-M centrifuge is supplied without a rotor. Compatible Z216 rotors are selected and purchased separately.

How many tubes can the Z216-M hold?
Maximum capacity depends on the installed rotor. With the Z216-4420 rotor, the centrifuge can accommodate up to 44 × 1.5/2.0 mL microcentrifuge tubes.

What tube sizes can be used with the Z216-M?
Depending on the installed rotor and adapter, the Z216-M supports tube formats ranging from 0.2 mL to 5.0 mL. Rotor options are also available for PCR strips, spin column kits and hematocrit capillaries.

Can the Z216-M centrifuge display RCF instead of rpm?
Yes. The microprocessor control system allows speed to be selected and displayed in either rpm or RCF.

Does the Z216-M support PCR strips?
Yes. Compatible rotor options include the Z216-3202 PCR strip rotor and the Z216-2420S COMBI-Rotor, which accommodates both 1.5/2.0 mL microcentrifuge tubes and PCR strips.

Does the Z216-M have refrigeration?
No. The Z216-M is the non-refrigerated model. The Hermle Z216-MK is the refrigerated version of the Z216 series.

What is the difference between the Hermle Z216-M and Z216-MK?
Both models share the Z216 high-speed microcentrifuge platform, but the Z216-MK adds a refrigerated temperature-control system. The Z216-M is the non-refrigerated model.

Technical Specifications

Model	Hermle Z216-M
Product Type	High-speed microcentrifuge
Speed Range	200 to 15,000 rpm
Maximum Speed	15,000 rpm
Maximum RCF	21,631 × g
Maximum Capacity	44 × 1.5/2.0 mL
Supported Tube Range	0.2 mL to 5.0 mL, depending on installed rotor and adapter
Available Rotor Options	9
Speed Display / Selection	rpm or RCF
Speed Adjustment	Increments of 10
Acceleration / Deceleration	10 selectable rates; unbraked deceleration available
Program Storage	Up to 99 runs including rotor
Timer	Up to 99 hr 59 min or continuous
Drive	Maintenance-free induction drive
Lid Lock	Motor driven
Imbalance Protection	Active imbalance identification and cut-off
Noise Level	<60 dBA at 21,379 × g
Dimensions	11 × 15.3 × 11.4 in.
Dimensions (Metric)	28 × 38.9 × 29 cm
Weight	37.4 lb (17 kg)
Electrical	120V, 60Hz
Rotor Included	No – rotor sold separately

Rotors & Accessories

View compatible optional rotors, adapters, and accessories for this centrifuge.

View Rotors & Accessories

Ships from: New Jersey, USA
Typically ships within 48 hours upon receipt of an order
Two year warranty
CE certified
Shipping Cost:
$75 to Continental USA
$300.00 HI, AK, and PR
Return Policy